MB5 biocide for cosmetics
MB5 biocide for cosmetics
Mixture formular of MIT and BIT
Product name | MB5 Biocide; Formular biocide of MIT and BIT; |
Composition | MIT and BIT (Methylisothiazolinone; Benzisothiazolinone;) |
CAS | 2634-33-5; 2682-20-4; |
Application | Industrial Microbicide |
Similar product | Same as Thor’s product of Microcare SI; Innoman MB |
Our factory launch the MB5 biocide, whichis is an aqueous solution of BIT (1,2-Benzisothiazolin-3-one) and MIT(2-Methyl-4-isothiazolin-3-one) at a ratio of 1:1; The MB5 biocide combines the well proven active ingredients BIT and MIT which can provide a long-term and broad efficacy spectrum, widely used for the in-can preservation of technical products. MB5 biocide is a VOC- and AOX-free preparation. It is formulated without the addition of any organic solvents, halogenated organic compounds, formaldehyde releasing compounds or bivalent metal ions, and therefore, it is highly compatible in most binder and paint systems.
Specification (Formular biocide of MIT and BIT)
Items | Specification |
Appearance | Clear,yellow solution |
MIT (%) | 2.0-3.0 |
BIT (%) | 2.0-3.0 |
PH Value | 8.0-9.5 |
Miscibility/Solubility
MB5 biocide is miscible with water and most low alcohols, glycols and glycol ethers, clearly soluble in water at ready to use concentrations.
Feature of MB5
1) MB5 biocide is a new generation of synergistic type without CIT (5-chloro-2-methyl-4-isothiazolin-3-one), AOX (adsorbable organic halide) and VOC (organic volatile matter) Fungicide.
2) Do not add any organic solvents, halogenated organic compounds, formaldehyde releasers or divalent metal ions.
3) Easily soluble in water, most lower alcohols and glycols.
4) Wide applicable pH range, can be used in the range of 2.0 ~ 10.0.
5) It has a very broad-spectrum bactericidal activity against bacteria, molds and yeasts that cause pollution and degradation of aqueous products.
Usage and precautions:
1) It is recommended to use a concentration of 0.2-0.4%. Select the appropriate dosage according to the product used and the environmental conditions.
2) It should be noted that the temperature, pH value and redox potential during addition will not affect the stability of this product.
3) Store in the original container. Avoid extreme temperatures. Frost easily, BIT and BIT sodium salt may crystallize when the temperature is lower than 1℃; However, if it is heated to a maximum of 50℃, any crystals formed will dissolve again without affecting the performance.
Application
MB5 biocide can be used to protect latex paints, polymer emulsions, adhesives, enamels, fillers, sealants and other water-based products from harmful microorganisms when they are wet, especially suitable for products with higher pH values and environmentally friendly formulas.
If you have any interest about the MIT and BIT mixture, pls contact us freely. Sample could be supplied for testing.
