BIT fungicide BIT-85 powder preservatives
Powder preservative BIT-85 benzisothiazolinone (1,2-benzisothiazolin-3-one) is the main industrial antiseptic, antiseptic and enzyme inhibitor. It is an outstanding antiseptic that inhibits the growth of molds (fungi, bacteria), algae and other microorganisms in organic media, and solves a series of problems of mold, fermentation, deterioration, demulsification, odor, etc. of organic products caused by the growth of microorganisms.
Product name | BIT Biocide; Benzisothiazolinone; |
Chemical name | 1,2-benzisothiazolin-3-one |
CAS No. | 2634-33-5 |
EINECS No. | 220-120-9 |
MF | C7H5NOS |
MW | 151.1857 |
Melting point | 154-158 °C(lit.) |
BIT is the main industrial antiseptic, antiseptic and anti-enzyme agent. It has outstanding inhibition of the growth of molds (fungi, bacteria), algae and other microorganisms in the organic medium, and solves a series of problems such as mold, fermentation, deterioration, demulsification, odor, etc. of organic products caused by the growth of microorganisms. Therefore, developed countries widely use BIT in latex products, water-soluble resins, coatings (latex paint), acrylics, and polymers. Polyurethane products, photographic lotions, papermaking, inks, leather, lubricants and other products.
Directions for Use
Below are some general dosing recommendations, however, it is recommended to do specific testing on the end product to determine optimal dose levels.
Product (based on total weight of product) | BIT-85 |
Polymer Emulsions: Polymer emulsions based on styrene acrylic, acrylic, butadiene, PVA and styrene for various applications. | 0.005 - 0.015% |
Emulsions paints and coatings | 0.005 - 0.025% |
Water based adhesives | 0.005 - 0.025% |
Printing Inks and fountain solutions | 0.005 - 0.015% |
Plasters | 0.005 - 0.025% |
Building materials such as caulks, sealants, grouts, spackling, ready-mix cement and wallboard compounds, and tape joint compounds | 0.008 - 0.025% |
Oil recovery materials, such as drill muds, packer fluids, and completion fluids, containing polysaccharide fluid loss control agents and/or thickeners such as starch. | 0.005 - 0.015% |
Secondary oil recovery injection water containing additives, such as polymer or micellar/polymer waterfloods using thickeners. such as xanthan gum. | 0.0015 - 0.015% |
Important statement:
This manual is compiled on the basis of our company's many years of experience. The suggestions on use and application are for reference only; in order to ensure the anti-corrosion effect, please do the sufficient test and test of the antiseptic according to your specific situation, and the specific use concentration depends on Factors such as the sensitivity of the final product to microorganisms, the choice of raw materials and the sanitary conditions in the production process of the product.
