Formula Biocide of Cmit Mit and Bronopol
Formulated Biocide of Cmit Mit and Bronopol
Product name: Cmit Mit and Bronopol formular biocide
CAS No.: 26172-55-4; 2682-20-4; 52-51-7;
Type: WT 305
This fungicide is the formula biocide of 5-chloro-2-methyl-4-isothiazolin-3-one, 2-methyl-4-isothiazolin-3-one and Bronopol. Free of formaldehyde.
Composition:
CAS No. | Active | Weight % |
26172-55-4 | 5-Chloro-2-methyl-4-isothiazolin-3-one | ≥2.0% |
2682-20-4 | 2- methyl -4-isothiazolin-3-one | |
7786-30-3 | Magnesium chloride | 0.9-1.0% |
10377-60-3 | Magnesium nitrate | 3.0-3.5% |
52-51-7 | Bronopol | 9.5-11.0% |
7732-18-5 | Water | Balance |
This formula product of CMIT/MIT and Bronopol mixture. Widely used in the wet state corrosion protection of water-based products. It can be used to protect water-based products such as latex paint, polymer emulsion, adhesives, enamel, fillers, sealants, etc. from harmful microorganisms. It can also be used in the treatment of diluted metal cutting fluids, additive.
Specification:
ITEM | Standard |
Appearance | Clear, colorless or yellow solution. |
Active ingredient (%) | ≥12.0 |
PH Value | 2.0-5.0 |
Density (g/ml) | 1.05-1.15 |
Characteristics
1) Broad-spectrum sterilization, high efficiency and environmental protection.
2) Does not contain heavy metals, has good miscibility with water, and is easy to operate.
3) Miscible with water, can be added in any process, easy to operate.
4) The suitable pH value is 2.0-9.0, and the stability is poor in alkaline medium with pH>9.0.
5) Low toxicity, degradable, and will not pollute the environment.
6) Non-flammable, easy to transport and easy to use.
Usage and precautions
1) It can be added to leather, paint coating, textile printing and dyeing, daily chemicals and cosmetics, which can effectively control the reproduction of fungi and prevent mildew. The recommended dosage is 50-200 ppm. Papermaking, water treatment and other fields can be adjusted according to production conditions, and the recommended dosage is 0.1-0.4% (W/W).
2) The suitable pH value is 2.0-9.0, and the stability is poor in alkaline medium with pH>9.0.
3) This product should not be in contact with reducing metals, such as metal iron, aluminum, etc., during storage to avoid product decomposition.
