Formula biocide DBNPA for eliminating microbial contamination in raw materials or products
DB20 Biocide is a fast acting broad-spectrum antimicrobial. It is belongs to the formula biocide of DBNAP, killing bacteria rapidly and effectively. It also could eliminate the odor.
This biocide is ideal for eliminating microbial contamination in raw materials or products, used to prevent the growth and reproduction of bacteria and algae in papermaking, industrial circulating cooling water, lubricating oil for metalworking, pulp, wood, paint and plywood, and can be used as slime Control agent, widely used in pulp and circulating cooling water systems in paper mills.
Chemical and Physical Properties
Appearance: | Colorless to slightly yellow liquid |
Active ingredient: | 20% |
Odor: | Slight |
PH(20℃): | 1-5 |
Solubility: | easily soluble in water, most low molecular weight alcohols and ethylene glycol |
Features
1) Non-oxidizing bactericides;
2) Very fast, very efficient, the sterilization rate can reach 99.999%;
3) Safe, can decompose quickly, the final decomposition products are carbon dioxide, ammonia and so on.
DB 20 biocide has a variety of bactericidal action principles, the bactericidal speed is very fast, and it has a very broad-spectrum bactericidal activity against bacteria, molds and yeasts that cause contamination and degradation of water-based products
MIC | |
Bacteria (Gram Negative) MIC | Bacteria (Gram Negative) MIC |
Escherichia coli 5ppm | Staphylococcus aureus 5ppm |
Pseudomonas aeruginosa 8ppm | |
Yeast MIC | |
Candida albicans 12ppm | |
Application: water-based coatings, polymers, slurries, adhesives, latex, admixtures, process water and special industrial products.
It is especially used for rapid disinfection of production equipment and workplaces, prevention of microbial infection in raw materials and finished products, remediation and recovery of product microbial contamination in the early stage, and is widely used in water-based formulations.
Usage
1) It can be added at any stage of the production process, but it is recommended to be added as early as possible in the production process. And it should be noted that the temperature, Ph value and redox potential when adding will not affect the stability of this product. When using this product for the first time, it is recommended that users conduct experiments.
2) DB20 can effectively kill more than 90% of bacteria within 20 minutes, and the sterilization speed is accelerated with the increase of PH value and temperature. The PH value should be used in the range of 3-10, and the temperature should not be higher than 50 ℃. If the PH value exceeds 10, the dosage can be appropriately increased and the stirring speed can be accelerated;
3) According to different environmental conditions, the half-life is usually not more than 30 minutes, and 99.999% of the bactericidal efficacy can play a role before decomposing to failure;
4) DB20 needs to be diluted with water before use, and the dilution ratio is more than 25 times, otherwise crystals may be precipitated;
