Our factory produce the MB5 Biocides which is used for cosmetics, it combines the well proven active ingredients BIT and MIT. MB5 is a VOC- and AOX-free preparation. It is formulated without the addition of any organic solvents, halogenated organic compounds, formaldehyde releasing compounds or bivalent metal ions. Widely used to protect latex paints, polymer emulsions, adhesives, enamels, fillers, sealants and other water-based products from harmful microorganisms when they are wet, especially suitable for products with higher pH values and environmentally friendly formulas.

Our factory professcial produce BIT-20 biocide, the solvent is including DPG, PG, TEG, or based on buyer's requst. BIT 20 Solution is a broad spectrum microbicide for the preservation of industrial water-based products against the attack of microorganisms.

BIT-20 biocide is a broad spectrum microbicide for the preservation of industrial water-based products against the attack of microorganisms. Specifically recommended for the preservation of polymer emulsions, paints and coatings, adhesives, and printing inks. It is with some compisition and effect as Proxel GXL.

BIT 85% biocide is a broad spectrum microbicide for the preservation of industrial water-based products against the attack of microorganisms. BIT 85% Powder containing 99% W/W 1,2-Benzisothiazolin-3-one.

BIT 85% biocide is a broad spectrum microbicide for the preservation of industrial water-based products against the attack of microorganisms. BIT 85% Powder containing 99% W/W 1,2-Benzisothiazolin-3-one.

Benzisothiazilinone is a broad spectrum microbicide for the preservation of industrial water-based products against the attack of microorganisms. BIT 85 Powder containing 99% W/W 1,2-Benzisothiazolin-3-one;BIT 85 biocide is specifically recommended for the preservation of polymer emulsions, paints and coatings, adhesives, and printing inks.

The BBIT biocide (n-butyl-1, 2-benzisothiazolin-3-one0) is with puirty 98% min. It could be used in the production process of liquid, powder or solid antibacterial products, and can be directly used in plastics or plastic products.

MB 10 biocide is an aqueous solution of 1,2-benzisothiazolin-3-one (BIT) and 2-methyl-4-isothiazolin-3-one (MIT).MB-10 preservative with the very different modes of action of the active agents is particularly effective in preserving a wide range of industrial aqueous-based products from bacterial and fungal spoilage.

MB 5 biocide is an aqueous solution of BIT (1,2-Benzisothiazolin-3-one) and MIT(2-Methyl-4-isothiazolin-3-one) ; It's miscible with water and most low alcohols, glycols and glycol ethers, clearly soluble in water at ready to use concentrations. Used to protect latex paints, polymer emulsions, adhesives, enamels, fillers, sealants and other water-based products

BIT-20 is dangerous cargo for sea shipment and air shipment. If you have any interest, pls contact us freely.